REALIZATION OF BANK'S PROPERTY

Evaporation system 1 SET, serial number SDIEVP-21JUL

It is designed for evaporation of moisture from preheated sugar to the desired moisture content (from 45% to 20%, for honey processing).

• system capacity (350 litres per hour)
• evaporation temperature 50-85°C
• cooling water 20 MT per hour
• consumption energy (steam pressure 0.3 MPa and voltage 4.4 KWh)

• Heating part (heat exchange area: 15m2) – 1pc
• Condensing part (heat exchange area: 20m2) – 1 pc
• Separation system (volume 750l)-1 pc
• Screw pump (power 1.5 kW, flow rate 0.3 m3/h) – 1 pc
• Water (condensate) pump (power 0.55 kW, flow rate Q: 1 m3 / h) 1 pc
• Vacuum pump (power 4 kW)
• Vapor valves (solenoid valve (1 pc.) and condensate retention valve (1 pc.))
• Valves and instruments (optical reader BRIX-1 pc; pressure meter - 1 pc; temperature meter - 1 pc; condensate level sensor, pipes and valves)
• Operating platform (including platform, legs, columns, ladder, handrails).

Year of manufacture - 2021, Country of manufacture - China.
The equipment is in working condition, located in Kirovograd Oblast, Kropyvnytskyi Raion, village of Hruzke. The property is owned by the Bank.

6460 MS/MS High Performance Liquid Chromatography System

Laboratory equipment designed for mass quantitative analysis in areas such as drug metabolism and pharmacokinetics (ADME/DMPK), biomarker analysis, clinical research, food safety, forensic science, toxicology, and environmental monitoring.

List of main components*:

• 1260 Infinity high-performance eluent dispenser
• 1260 Infinity dual-channel pump with solvent tray
• 1290 Infinity sample thermostat with temperature control from 4 to 40 degrees
• 1290 Infinity column thermostat with temperature control up to 100 °C
• column switch for automatic selection of up to 4 columns
• 1260 Infinity refractive index detector
• mass AGILENT 6460 triple quadrupole spectrometric detector 1260 Infinity is a high-performance automatic pipette with needle flushing function to reduce cross-contamination, pressure up to 600 bar
• Bepiate 3020 nitrogen generator with a capacity of 2x32 litres.

* A full list of components will be provided upon request.

Year of commissioning: 2018, country of manufacture: Japan, Germany.
The equipment is in good condition, located in Kyiv. Property owned by the Bank.

Equipment for laboratory research and chemical analysis of products

(designed for measurements of stable isotopes of light gas-forming elements and sample processing in a wide range of research areas), including:

1. Optical spectrometer IRMS system Isoprime Precision
High performance stable isotope mass spectrometer, leading the way in modern stable isotope ratio mass spectrometry.

• high flexibility, full integration of all injection systems, including new injection systems
• high sensitivity, able to analyse the most complex samples with exceptionally high ion source sensitivity
• small footprint, nearly 50% smaller than any other commercial stable isotope mass spectrometer
• high data quality, enabling the highest analytical efficiency.

Year of manufacture – 2021, country of manufacture – Great Britain.

2. Analyser System Vario Isotope Select
Designed for simultaneous analysis of carbon, nitrogen and sulphur isotope ratios in samples up to 300 mg, also has an option for determining water isotope concentration.

• excellent peak shapes and separation with simultaneous NCS analysis
• for very low sulphur analysis in high carbon samples
• low level isotope concentration analysis
• high operating comfort due to high automation and low maintenance
• 240-position autosampler for maximum microsample throughput.

Year of manufacture – 2021, country of manufacture – Germany.

A set of consumables for laboratory testing and licences for the use of laboratory equipment for chemical analysis of products are also included.

The equipment is in good condition, located in Kyiv. Property owned by the Bank.

Land plot with a total area of ​​16.1379 hectares, located at: Kyiv region, Buchanan city council

Intended purpose - for the construction and maintenance of an apartment building, cadastral number 3210945300:01:128:0143.

The plot is located within the city of Bucha, on its outskirts, in the "Warsaw Market" district. The location area is characterized by developed transport and social infrastructure. The plot is free from development. On the eastern side of the plot, multi-apartment residential buildings are being built, on the western, southern and northern sides - shrubs and wastelands. The distance of the site to Kyiv is 25 km, nearby is the "Warsaw Highway" highway (about 0.2 km). Also nearby is a railway line and a stop for suburban trains.

Three-room apartment in Kiev

Three-room apartment No. 211 with a total area of 172.6 square metres, located at: Kyiv, General Shapoval Street (Mechanizatoriv Street), building 2A.

• Floor/number of floors – 3/25
• Total area – 172.6 sq. m.
• Number of living rooms – 3
• Living area – 103.3 sq. m. (1st room – 20.4 sq. m., 2nd room – 25.6 sq. m., living room – 57.3 sq. m.)
• Kitchen – 26.3 sq. m.
• Bathroom – 3.2 sq. m. and 10.3 sq. m.
• Corridor – 6.4 sq. m. and 3.9 sq. m.
• Storage room – 2.6 sq. m.
• Wardrobe – 13.0 sq. m.
• Balcony – 3.6 sq. m.
• Room height – 3.02 m.

The building in which the apartment is located is part of the Smaragdovy residential complex, built in 2010 according to an individual design. Closed territory, round-the-clock security and video surveillance.
The apartment door is metal armoured. Finishing: flooring – parquet boards, tiles; walls – paint, decorative elements, tiles; ceiling – stretch, suspended ceiling elements, with built-in lighting fixtures. There are air conditioners. In the kitchen: extractor hood, built-in kitchen, household appliances. Interior doors are wooden. Windows are metal-plastic. Plumbing is in good condition, there is a boiler.
The apartment was used as an office.